Week 2 Lecture – Chapter 6 Management Assignment

Week 2 Lecture – Chapter 6

ECO524 Managerial Economics
Lecture – Chapter 6

Pricing, Costs, and Profits: Part 1
In this unit, we begin our study of how a firm sets their price to maximize profits with a simple model (more complex situations will be studied in Week 4). We will also study ways of reducing costs

Chapter 6

Main Points

  • Aggregate demand or market demand is the total number of units that will be purchased by a group of consumers at a given price.
  • Pricing is an extent decision. Reduce price (increase quantity) if MR > MC. Increase price (reduce quantity) if MR < MC. The optimal price is where MR = MC.
  • Price elasticity of demand, e = (% change in quantity demanded)  (% change in price)%Revenue  %Price + %QuantityElastic Demand (|e| > 1): Quantity changes more than price.
    • Estimated price elasticity = [(Q1 – Q2)/(Q1 + Q2)]  [(P1 – P2)/(P1 + P2)] is used to estimate demand from a price and quantity change.
    • If |e| > 1, demand is elastic; if |e| < 1, demand is inelastic.
  Revenue
Price ↑ –
Price ↓ +
  • Inelastic Demand (|e| < 1): Quantity changes less than price.
  Revenue
Price ↑ +
Price ↓ –

 

  • MR > MC implies that (P – MC)/P > 1/|e|; that is, the more elastic demand is, the lower the price
  • Four factors make demand more elastic:Income elasticity, cross-price elasticity, and advertising elasticity are measures of how changes in these other factors affect demand.It is possible to use elasticity to forecast changes in demand: %ΔQuantity ≈ (factor elasticity)*(%ΔFactor).
    • Products with close substitutes (or distant complements) have more elastic demand.
    • Demand for brands is more elastic than industry demand.
    • In the long run, demand becomes more elastic.
    • As price increases, demand becomes more elastic.
  • Stay-even analysis can be used to determine the quantity change required to offset a price change. The stay-even quantity is %ΔQ=%ΔP/(%ΔP+margin).

Demand Curves
The firm’s ultimate goal is to maximize profit. For a firm to maximize its profit, it must determine its marginal costs and marginal profits for all potential levels of output so that it can compare the marginal cost with the marginal revenue of expanding output. To determine the marginal revenue, the firm must know how much of their good they will sell at any given price in a given amount of time. Economists refer to the relationship between the price of an item and the quantity of items that will be sold as the market demand for that good. When the market demand is illustrated graphically, with price on the vertical axis and quantity sold on the horizontal axis, the line generated is called the demand curve.

One way to determine a point on the demand curve is for the firm to set a price for its good and observe how many units it sells in a month (or some unit of time). The firm can then determine another point on the demand curve by changing the price charged for the good and observing the quantity sold the following month. However, one must be aware that the demand curve can change over time and thus the two points generated may be on different demand curves. A second way to determine the demand curve is to ask all potential customers how many units of the good they would purchase at various prices. For each price that was asked, the sum of the answers would be a point on the estimated demand curve. There are obvious problems with actually using that method to determining the demand curve – people may not be honest, it may be difficult for consumers to put themselves in the new situations and accurately determine their level of purchases – but it is a helpful way of thinking about the demand curve. For instance, if the population increases, at each price more units would be sold as the new arrivals would purchase some positive quantity while the customers who were previously in the market would not change their answer, and so at any price the new demand curve would be to the right of the old demand curve. This is one way the demand could increase. The book discusses others.

Optimal Price and Quantity
Once the demand curve is known, the marginal revenue generated by increasing output can be determined. For instance, suppose the firm has discovered that at a price of $7, 100 units of the good will be sold and so the revenue of the firm will be $700. In order to sell more output, the price must be decreased (that is the Law of Demand). If the price is decreased to $6.75 and the quantity demanded increases to 120 units, then the firm’s revenue will increase to $810. This price change increases the firm’s revenue by $110.  Since the firm would need to increase its output by 20, the increase in revenue for a one unit change in output is $110/20 = $5.50. This is the firm’s marginal revenue for increasing output by one unit. The firm’s marginal cost of one more unit of output can be compared to $5.50 and if the marginal cost is less, the firm should expand its output.

Price Elasticity of Demand
Elasticity measures how responsive one economic variable is to changes in another economic variable. Knowing the various definitions of elasticities and their numeric magnitude are very important to managers and firms. We have previously noted that a decrease in price will increase quantity demanded. But by how much? That is the question that the price elasticity of demand can answer. Once the answer is calculated, then the revenue can be determined at the new price and the marginal revenue can be computed.

Elasticity is defined as the percent change in one variable divided by the percent change on another variable. To illustrate the calculation, let us assume that at a price of $4, 10 units of a good will be demanded and at a price of $3 the quantity demanded will be 12 units. The percent change in the price is calculated as (4 − 3) / [ (4 + 3) / 2 ] x 100% = 28.57%*. Similarly, the percent change in quantity is (10 − 12) / [ ( 10 + 12 ) / 2 ] x 100% = −18.18%. The price elasticity of demand is the percent change in quantity divided by the percent change in price, or −18.18% / 28.57% = −0.64. The minus sign indicates that the price and quantity move in opposite directions.  This is expected from the Law of Demand. The magnitude can be interpreted as follows: since elasticity is equal to the percent change in quantity divided by the percent change in price, setting the percent change in price equal to 1% means that the percent change in quantity demanded is equal to the magnitude of the elasticity. In other words, decreasing the price by 1% will increase the quantity demanded of this particular good by 0.64%.

It may seem like calculating elasticity is an extra step in the process; after all if we already have the quantities demanded at two different prices, then we can determine the change in revenue arising from changing the price from one of the prices to the other. However, if we want to consider charging a price that has not already been set, then we can use the calculated magnitude of elasticity to estimate the change in quantity demanded and determine the effect on revenue. That is, if the quantities demanded at prices of $10 and $12 are known because the price of the good was recently set at those prices, the quantity demanded at $14 can be estimated without needing to set the price at $14.

Various Elasticities
There are other economic variables that can be used in the elasticity formula that are relevant to businesses. For instance, a bar may reduce the price of beer which will increase the number of appetizers it sells. The bar’s profit depends both on the quantity and price of beer and on the quantity and price of appetizers that it sells. The cross-price elasticity of demand is used to measure the change in quantity demanded of one good when the price of a related good changes—it is defined as the percent change in the quantity of appetizers divided by the percent change in the price of beer. In this case, one would expect the quantities to change in opposite directions, as a lower price of beer would attract more customers who might buy appetizers. Because the variables move in opposite directions, the cross-price elasticity would be negative; a negative cross-price elasticity signifies that the goods are compliments, or goods that are used together. For goods that are substitutes—goods that can be used in place of each other—if the price of one good increases we would expect the quantity demanded of the other good to increase. For instance, if the price of Pepsi increases, then we would expect the quantity of Coca-Cola sold to increase. Since the variables move in the same direction, the cross-price elasticity would be positive. A firm can use cross-price elasticities can be used to determine the effects of price changes of related goods on the quantity demanded of the good they are attempting to sell.

Another type of elasticity is the income elasticity of demand.  As you might guess from the name, income elasticity is used to measure the change in quantity demanded as the consumers’ incomes increase.  For most goods, the income elasticity is positive.  Economists call such goods normal goods.  However, there are some goods for which the quantity demanded actually decreases.  Economists refer to those goods as inferior goods.  The level of income may also affect whether a good is normal or inferior.  For instance, consider a low-quality cut of steak.  For someone with a low income, the quantity demanded may be zero.  As her income increases, occasionally she will increase her consumption of the cut of steak, perhaps replacing hamburger.  At this point the low-quality cut of steak is a normal good for our consumer.  As her income further increases she may start substituting a higher-quality cut of steak in place of the low-quality cut.  Thus, for the higher level of income, the low-quality cut of steak is an inferior good.  As with the cross-price elasticities, the income elasticity of demand can be used by companies to maintain awareness of how changes in its economic environment will affect its business.

*Note that the percent change formula used here is slightly different that the ‘normal’ percent change calculation as we are using the midpoint in the denominator instead of the initial value.  This is so the elasticity calculation will return the same value whether we call the $4, 10 unit point the initial point or the final point.  It will be important to be consistent in labeling, however.  If you use $4 as the initial price, then make sure to use 10 as the initial quantity.

 

 

Week 2 Lecture – Chapter 7

ECO524 Managerial Economics
Lecture – Chapter 7 

Chapter 7

Main Points

  • The law of diminishing marginal returns states that as you try to expand output, your marginal productivity (the extra output associated with extra inputs) eventually declines.
  • Increasing marginal costs eventually cause increasing average costs and make it more difficult to compute break-even prices. When negotiating contracts, it is important to know what your costs curves look like; otherwise, you could end up accepting contracts with unprofitable prices.
  • If average cost falls with output, then you have increasing returns to scale. In this case you want to focus strategy on securing sales that enable you to realize lower costs. Alternatively, if you offer suppliers big orders that allow them to realize economies of scale, try to share in their profit by demanding lower prices.
  • If your average costs are constant with respect to output, then you have constant returns to scale. If average costs rise with output, you have decreasing returns to scale or diseconomies of scale.
  • Learning curves mean that current production lowers future costs. It’s important to look over the life cycle of a product when working with products characterized by learning curves.
  • If the cost of producing two outputs jointly is less than the cost of producing them separately—that is, Cost(Q1,Q2) < Cost(Q1) + Cost(Q2) — then there are economies of scope between the two products.  This can be an important source of competitive advantage and shape acquisition strategy.

Increasing Marginal Cost and (Dis)Economies of Scale
What is the “best” output for a firm in terms of minimizing average costs? Why is that important? To answer the second question first, in Chapter 9 we will see that if firms are making profit, other firms will be enticed to enter the market. Since one way to increase profit is to lower costs, in the long run firms will be operating at the lowest possible average cost. Thus, the size of an individual firm can be predicted as well as the number of firms in the market – if we know the total quantity demanded and how much an individual firm will produce, a simple division will show the predicted number of firms.

Since the total cost is the sum of variable costs and fixed costs, the average variable cost curve and average fixed cost curve can be used to understand the shape of the average cost curve (remember, average cost equals total cost divided by quantity). The average fixed cost curve is straightforward because the numerator is constant and the denominator increases as output increases. Thus, for low quantities the average fixed cost is large and it decreases as the output increases. The average variable cost has in general a slightly more complicated shape. Typically, the average variable cost curve is large for low quantities, decreases as quantity increases to some point, and then increases past that point. In other words, it has a U-shape.

To understand why the average variable cost curve looks the way it does, the marginal cost curve is useful. If the marginal cost curve is higher than the average variable cost curve, as the quantity increases the average variable cost curve will increase, and vice-versa. For example, if you receive an A in all the classes you are taking this term and your GPA entering the term was 3.75, the 4.0 you earned this term will increase your cumulative GPA. If you received an A and a B, for a ‘marginal’ GPA of 3.5, your cumulative GPA would decrease.

The usual shape of the marginal cost curve is U-shaped. To illustrate why, consider a pizza shop. To simplify things, we will assume employees are the only variable cost the pizza has, and that the cost per employee is constant. Increasing employment from one to two employees will result in a larger increase in output than going from one employee to two. One employee would need to frequently switch tasks, resulting in unproductive time (washing hands, walking from one area to another, and so on). A second employee would allow specialization to occur. Perhaps one employee works the front of the store while the other concentrates on making pizzas. Less time is wasted transitioning from one task to another, so the increase in output is larger when the second employee was added than when the first employee was added. Since the increase in cost was the same for each employee, the marginal cost for the pizzas the second employee added is less than the marginal cost for the pizzas the first employee added. However, at some point as employees are added they will start to get in each other’s way. This means the increase in output from adding an additional worker will be smaller as more employees are added, and the marginal cost of each additional pizza will be higher.

We can now return our attention to the typical average variable cost curve. The average variable cost curve is usually high at low quantities because of the lack of specialization at those quantities. The marginal cost curve is below the average cost curve for low quantities and so as the quantity increases the average variable cost curve decreases.  However, the U-shape of the marginal cost curve means that eventually the marginal cost curve will be higher than the average variable cost curve and therefore at some point the average variable cost curve will start increasing with quantity. Note that it is possible for the marginal cost curve to be higher than the total average cost curve for all quantities, in which case the average variable cost curve is always increasing with quantity.

In either case, the average total cost curve will be U-shaped. At the low-quantity end the average fixed cost curve is rapidly changing and it has the dominant influence on the shape of the average total cost curve. As the quantity increases, the fixed cost curve becomes flatter and so the average variable cost curve begins to have a larger effect on the shape of the average total cost curve. Since the average variable cost curve is increasing with quantity at higher outputs, the average total cost curve will also be increasing with quantity.

Understanding the general shape of the average cost curve and the gains from specialization is important to firms. If the firms are trying to minimize cost in order to maximize profits, understanding where they are on the average cost curve is important. If they are at a point where the average cost is falling as output is increasing, where they are said to have economies of scale, they should increase output to lower average costs. If they are at a point where they are experiencing diseconomies of scale, where average costs increase as output is increased, then to lower average costs output should be decreased. These ideas apply to the firm as a whole as well as on an individual unit. That is, suppose a firm has one factory currently producing output and wants to increase its total output. The shape of the average cost curve for the factory can determine whether expanding production at the existing factory or building a new factory is the best option.

(Dis)Economies of Scope
Producing related products can also decrease average costs. For instance, a beverage company producing a cola product has some economies of scope in producing a bottled water product. Among potential benefits of producing both products are that bottling knowledge can be applied from one product to another, the distribution mechanisms work just as well for cola as for water, and there may be marketing synergies as well.  Analyzing or finding economies of scope are more difficult than economies of scale since there are many more potential ways to reduce prices via considering economies of scope whereas the only way to make use of economies of scale are to increase or decrease the level of output.

 

 

 

 

 

 

 

Discussion

Resources
Read/review the following resources for this activity:

  • Textbook: Chapters 6, 7
  • Minimum of 2 library resources for initial post (e.g. articles from Time, the Wall Street Journal, Forbes, etc.)

Introduction
Every Nation must choose the economic system it prefers to use in answering the fundamental questions posed by the economic problem, or wants-means dilemma. (The fundamental questions are: What should we produce? Who should produce the output? How much should we produce? Who should receive the output?) The basic economic systems are: a market economy; a mixed economy; or a command economy. In the market economy the questions are answered by the decisions made purely in the marketplace. In a command economy a group of people construct economic plans that answer the fundamental questions that face the economy. (In the former USSR the GOSPLAN [a group of twelve people] determined what to produce, who should produce, and how much to produce. Those twelve people also decided who should receive the output of the Soviet Union by setting prices.)

While the United States emphasizes reliance on the market as the place where the fundamental questions shall be answered, we actually function within a mixed economy where the market system and government combine, to answer the fundamental questions of our nation. Since the installation of the new President and Congress in 2009, we have seen legislation that transfers even more decision making from the private sector to the public sector.

Initial Post Instructions
Why do those nations that rely more heavily on the market system, combined with government participation, actually generate the bulk of world output? What do you believe is the best economic system for a country to utilize?  If you believe the best economy is a mixed economy, which markets should be non-market based?  Why in those markets is it wise to ignore or otherwise not allow prices to signal value?

These are extraordinary times, and our Congress and Administration have determined that the bailouts are essential because the firms affected most are too large to fail. Have you ever wondered whether we might have moved away from the middle of the road of a mixed economy with the bailouts? Is there a risk that we might have set a precedent for bail out requests from businesses of other types in the future? If firms begin to expect bailouts, what sorts of behavior would we begin to see?  How will that behavior affect the economy?

Writing Requirements

  • Initial Post Length: minimum of 350 words

Using APA format, provide at least two citations with corresponding references page and use appropriate in-text citation(s) referring to the academic concept for the initial post.

Previous answers to this question


This is a preview of an assignment submitted on our website by a student. If you need help with this question or any assignment help, click on the order button below and get started. We guarantee authentic, quality, 100% plagiarism free work or your money back.

order uk best essays Get The Answer

Leave a Reply

Your email address will not be published. Required fields are marked *