iLab 1 of 7: Basic Server Configuration\ti L A B\u00a0 A C C E S S \ufffd \ufffd\u00a0\u00a0\u00a0\t\u00a0\tAccessing Your Lab \ufffd\u00a0\u00a0\u00a0\u00a0\tAfter logging into Element K, follow these steps to access your labs.\t“\ufffd \ufffd \ufffd\u00a0\u00a0 Click the Professional Development tab located on the top of the page.\t“\ufffd \ufffd \ufffd\u00a0\u00a0 Select “Development Paths.”\ufffd NETW 230 will be listed on this page.\t“\ufffd \ufffd \ufffd\u00a0\u00a0 Click on NETW 230 to see the labs.\t“\ufffd \ufffd \ufffd\u00a0\u00a0 Your labs will be found under the appropriate week.\tStarting Your Lab\tThere are two ways to start a lab activity.\t“\ufffd \ufffd \ufffd\u00a0\u00a0 Schedule it. (Recommended)Because you will be accessing live equipment, the number of students who can simultaneously perform a lab is limited by the available resources. If you plan to perform your labs during busy times (i.e., weekends), it is recommended that you schedule the lab to make sure that lab resources will be available when you are ready.\t“\ufffd \ufffd \ufffd\u00a0\u00a0 Start it right away.\tNote: If all lab resources are currently being used when you try to start your lab, you will be given an opportunity to schedule the lab at a later time.\tRemember This\tPlease Note: The time displayed at the start of the lab does not indicate the length of time it will take you to complete the lab. It represents the total time that network resources are reserved to you.\t\u00a0\t\u00a0\ti L A B\u00a0 O V E R V I E W\u00a0\u00a0\u00a0\u00a0\t\u00a0\tScenario and Summary\u00a0\tWelcome to your Week 1 iLab!\t“\ufffd \ufffd \ufffd\u00a0\u00a0 Basic Server Configuration (50 points)\tIn this lab, you will do some basic configuration of the server. After Windows Server 2008 is installed, you still have to set the time zone, configure networking, and change the computer name.\tDeliverables\tYou are required to submit a lab report to this week’s iLab Dropbox.\t\u00a0\ti L A B\u00a0 S T E P S\u00a0\t\u00a0\tSTEP 1: Download the template\t\u00a0\tDownload this week’s Lab Report Template. You will use this template to create your lab report as you execute your lab. This lab just requires a single screenshot but subsequent weeks will require quite a bit more work.\tHere are some instructions on how to capture screenshots for your lab report.\t1. \ufffd \ufffd\u00a0 Complete the lab step that you would like to capture in a screenshot.\t2. \ufffd \ufffd\u00a0 Click on the server’s desktop that contains the window you want to capture.\t3. \ufffd \ufffd\u00a0 Hold down the ALT key and press the Print Screen key on your keyboard to copy it to your clipboard. On some keyboards, it is written as Print Scrn or PrtSc. Also, on some laptops you also have to hold down the Fn key.\t4. \ufffd \ufffd\u00a0 Click on your Lab Report (this document).\t5. \ufffd \ufffd\u00a0 Scroll to the point in the Lab Report where you what the screenshot to appear.\t6. \ufffd \ufffd\u00a0 Right-click and select Paste, or press Ctrl + V.\t7. \ufffd \ufffd\u00a0 Once your screenshot appears in your Lab Report, click on your lab and continue to the next step.\tSTEP 2: Complete the lab work\u00a0\t\u00a0\tAfter entering the main lab page, perform your lab.\t1. \ufffd \ufffd\u00a0 Ensure that you meet the system requirements for this lab and that you understand how to control the devices in the lab.\t2. \ufffd \ufffd\u00a0 Start your lab and complete each task by following the steps in the Sample Solution.<\/p>\n","protected":false},"excerpt":{"rendered":"
iLab 1 of 7: Basic Server Configuration i L A B\u00a0 A C C E S S \ufffd \ufffd\u00a0\u00a0\u00a0 \u00a0 Accessing Your Lab \ufffd\u00a0\u00a0\u00a0\u00a0 After logging into Element K, follow these steps to access your labs. “\ufffd \ufffd \ufffd\u00a0\u00a0 Click Read More …<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[],"tags":[],"class_list":["post-229812","post","type-post","status-publish","format-standard","hentry"],"_links":{"self":[{"href":"https:\/\/www.benedictsol.com\/blogs\/wp-json\/wp\/v2\/posts\/229812","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.benedictsol.com\/blogs\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.benedictsol.com\/blogs\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.benedictsol.com\/blogs\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.benedictsol.com\/blogs\/wp-json\/wp\/v2\/comments?post=229812"}],"version-history":[{"count":0,"href":"https:\/\/www.benedictsol.com\/blogs\/wp-json\/wp\/v2\/posts\/229812\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.benedictsol.com\/blogs\/wp-json\/wp\/v2\/media?parent=229812"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.benedictsol.com\/blogs\/wp-json\/wp\/v2\/categories?post=229812"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.benedictsol.com\/blogs\/wp-json\/wp\/v2\/tags?post=229812"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}