Question 1\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd The production of large goods such as airplanes is best accomplished using a ____ layout.\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 2\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd All of the following are limitations to process layout except\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 3\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd An assembly line with 28 operations is to be balanced. The total amount of time required for all 28 operations is 39 minutes. The longest operation takes 2.2 minutes and the shortest takes 0.8 minutes. The line will operate for 450 minutes per day.\t\u00a0\t1. \ufffd \ufffd\u00a0 Determine the minimum and maximum cycle time.\t2. \ufffd \ufffd\u00a0 What is the output rate if the cycle time is set at 2.2 minutes?\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 4\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd Which one of the following fits best with process layout?\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 5\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd Which of the following is not a common reason for facility layout studies?\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 6\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd For a given cycle time in line balancing, assembly-line efficiency can be increased by\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 7\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd Considering ergonomics, which of the following does not fit?\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 8\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd The typical layout of facilities in a hospital would be an example of a ____ layout.\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 9\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd A ____ layout is an arrangement based on self-contained groups of equipment needed to produce a particular set of goods or services.\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 10\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd All of the following are common objectives of layout studies except\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 11\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd An assembly line with 28 activities is to be balanced. The total amount of time required for all 28 activities is 39 minutes. The line will operate for 450 minutes per day. What must the cycle time be to achieve an output rate of 400 units\/day?\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 12\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd A(n) ____ performs entire jobs rather than specialized, assembly line work.\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 13\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd Which of the following is not a disadvantage of virtual teams?\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 14\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd ____ set their own goals and inspect their own work, often hire their own replacements and prepare their own budgets.\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 15\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd The determination of specific job tasks and responsibilities is called ____.\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 16\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd The metric “perfect order fulfillment” is often used to measure ____.\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 17\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd A(n) ____ seeks to balance capacity and demand, might use only a few large distribution centers, and minimize costs of routing products from factories to retail stores and customers.\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 18\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd Managing the flow of goods and materials from the customer backward through the supply chain is called\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 19\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd A firm that specializes in certain types of goods-producing activities, such as customized design, manufacturing, assembly, and packaging, and works for end users is called a ____.\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 20\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd A pull system\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 21\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd The point in the supply chain that separates the push system from the pull system is called the\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 22\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd Factors such as managers’ preferences, services and taxes, available transportation systems, banking services and environmental impacts would be most closely related to which level of the facility location hierarchy?\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 23\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd A contract manufacturer can offer significant competitive advantages. Which one of the following is not an advantage of using a contract manufacturer.\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 24\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd A(n) ____ produces only what is needed at upstream stages in the supply chain in response to customer demand signals.\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 25\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd The Supply Chain Operations Reference (SCOR) Model function that entails procuring goods and services to meet planned or actual demand is called ____.\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 26\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd The weights typically used in the center-of-gravity method are\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 27\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd A push system\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 28\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd Where in its supply chain does Dell, Inc. begin to use a pull system?\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 29\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd All of the following are considered non-economic factors in location decisions except\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0\tQuestion 30\t\u00a0\t \ufffd \ufffd \ufffd \u00a0\t \ufffd \ufffd \ufffd The center-of-gravity method takes all the following into account except<\/p>\n","protected":false},"excerpt":{"rendered":"
Question 1 \u00a0 \ufffd \ufffd \ufffd \u00a0 \ufffd \ufffd \ufffd The production of large goods such as airplanes is best accomplished using a ____ layout. \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \ufffd \u00a0 \ufffd \ufffd \ufffd \ufffd \ufffd Read More …<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[],"tags":[],"class_list":["post-204936","post","type-post","status-publish","format-standard","hentry"],"_links":{"self":[{"href":"https:\/\/www.benedictsol.com\/blogs\/wp-json\/wp\/v2\/posts\/204936","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.benedictsol.com\/blogs\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.benedictsol.com\/blogs\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.benedictsol.com\/blogs\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.benedictsol.com\/blogs\/wp-json\/wp\/v2\/comments?post=204936"}],"version-history":[{"count":0,"href":"https:\/\/www.benedictsol.com\/blogs\/wp-json\/wp\/v2\/posts\/204936\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.benedictsol.com\/blogs\/wp-json\/wp\/v2\/media?parent=204936"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.benedictsol.com\/blogs\/wp-json\/wp\/v2\/categories?post=204936"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.benedictsol.com\/blogs\/wp-json\/wp\/v2\/tags?post=204936"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}