{"id":122890,"date":"2018-02-20T23:50:30","date_gmt":"2018-02-20T23:50:30","guid":{"rendered":"https:\/\/writemyessayfree.com\/design-a-tube-bank-2"},"modified":"2017-08-12T07:44:37","modified_gmt":"2017-08-12T07:44:37","slug":"design-a-tube-bank-2","status":"publish","type":"post","link":"https:\/\/www.benedictsol.com\/blogs\/design-a-tube-bank-2\/","title":{"rendered":"Design a tube bank"},"content":{"rendered":"
\n ‘
\n ‘
\n February 20, 2017<\/time>\n <\/div>\n

<'\">
\n <\/i>0<\/span><\/a>\n <\/div>\n

\n <\/span> <\/span> 0<\/span> <\/a>\n <\/div>\n
\n <\/span>
\n Services<\/a>\n <\/div>\n<\/p><\/div>\n

Design a tube bank<\/h2>\n

Description
Design?a?tube?bank?that?will?increase?the?temperature?of?a?1200?CFM?flow?of?air?from?350F?to?1000F.?Assume?a
constant?pressure?of?1atm.?Each?tube?will?have?a?diameter?of?0.5in?and?a?length?of?24in.?The?tube?configuration
must?fit?in?an?area?of?18in?by?18in.?Assume?reasonable?uniform?surface?temperature?for?the?outside?of?the?tubes.
Finding?will?be?presented?in?a?report?with?a?memo?cover?sheet.?A?narrative?including?an?Introduction,?Analysis
Methods,?Results,?and?Conclusions?needs?to?be?provided.
Introduction:?Describe?the?problem
Analysis?Methods:?Describe?the?methods?used?to?analyze?the?problem.?Include?equations?used?and?any?other
tools?used.
Results:?Provide?a?dimensioned?drawing?of?the?design?along?with?any?results?obtained?from?calculations?or?other
analysis?methods.?The?drawing?should?include?the?tube?configuration,?number?of?tubes,?and?tub?spacing.
Conclusions:?Provide?a?summary?of?the?problem,?analysis,?and?results.?Also?discuss?what?measurements?and
controls?should?be?added?to?insure?1000F?air?at?the?exit.
Notes:
The?report?must?be?created?in?a?word?processing?program.
All?drawings?must?be?created?with?a?computer?aided?drafting?program.?Internally?Reference?all?research?sources
and?also?include?a?reference?page<\/p>\n<\/p>\n

\n
\n

Share this:<\/h3>\n
\n